DIK-Vacutech Back to Products


The DIK Vacu-Press Z deep-drawing device which is operating with compressed air is designed to produce plastic moulds, masks, settings etc. in a quick and easy way. The DIK Vacu-Press Z is qualified for deep drawing all kinds of jewel models out of different materials like metal, plastic, wood, glass, high melting waxes, china etc. to maximum dimension of 80 mm diameter.

  • Ingenious construction achieves full use of deep-drawing intensity. While compressed air creates a vacuum, the surface of the plastic sheet is covered with an infinitely variable adjustable pressure air.
  • No matter how thin, thick or tough the material is, this appliance can be used with various plastic foils.
  • Application in the entire field of thermo-molding possible.
  • Contains timer with second switching and a warning signal to denote end of process to control precise timing of the plastification of the various thicknesses and types of foils.
  • A particularly economical vacuum producer as it requires the minimum in air to create the vacuum.
  • A variable forming power resulting in better defined contures and greater deep drawing intensity.
  • The effect of the pressure on both sides of the sheet achieves better evenness in the wall thickness of the material.
  • No vacuum pump, thus maintenance free and easy operation.

Electrical: 230V, 150W, 50/60Hz
Compressed air required: min 4 bar (58psi)
Dimensions mm: W 460 x D 240 x H 260
Net weight: 10 kgs

Accessories not included:
  • Deep-drawing foils 0,5/0,6/0,7/0,8/1,0/1,5/2,0/3,0 mm
  • Undergo foils 0.1 + 0,15 mm
  • Metal grains
  • Equipment to make rings in one
    piece 12 different sizes.
Materials and specifications are subject to change without notice.
DIK-Vacutech Back to Products


Designed by
NETZNIESSER Freelance Services